LX5V: PLC Controller for Motor and Motion Control

LX5V PLC Controller particularly designed for motor control and motion control

Main Features:

High program capacity: 512KB, 384KB(With Ethernet)
High Speed of execution: 0.01us – 0.03us
High Communication speed: Baud rate up to 921600
8 High Speed Pulse outputs at up to 200khz
8 High Speed Counter at up to 150khz
NPN transistor outputs
Highly efficient and reliable PID control
E-Cam, E-Gear, Manual Pulse Generator etc
Supply Power 24VDC or 85-240VAC
Optional Ethernet Port
Expansion card and modules supported
Programming through MicroUSB or Ethernet Port

Specialised Software Kit:

WECON PLC Editor IDE – Motion Control for WECON PLC (LX5V) (Release Date: 26/05/2021 Ver2.1.82)

With a basic HMI screen of 7″ or 10″

With a high-end HMI screen of 7″, 10″ or 15″

Servo and Drive, VFD Tools:

PLC Wiring Diagram:

WECON PLC & Expansion Module Wiring Diagram

PLC/HMI catalogue

WECON PLC/HMI Catalogue 2021

Data sheets:

Comparison of WECON 5 Series of PLCs:

entries per page

Search:

	LX3V	LX3VP	LX5V (Motor and Motion Control)	LX5S
Power Supply	24VDC or 240VAC	24VDC or 240VAC	240VAC	24VDC
Programming Memory	16k	64K	512KB or 384K(With Ethernet Port)	512KB or 384K(With Ethernet Port)

Command Execution Time	06.0us	06.0us	0.01-0.03us	0.03-0.08us
Output Type	Transistor or Relay Or Mixed	Transistor or Relay Or Mixed	Transistor	Transistor or Relay Or Mixed
Serial Ports	1 RS422/RS485, 1 RS485 Only, More RS485 via Expansion Card	1 RS422/RS485, 1 RS485 Only, More RS485 via Expansion Card	1 RS422/RS485, 1 RS485. More RS485 via Expansion.	1 RS422/RS485, 1 RS485.
N:N Network	N/A	YES	YES	YES
CAN Bus	N/A	Optional for some models, CAN Open DS301 V4.02, PI8000 HMIs Support CAN Bus	NO
High Speed Counter	2	2	8
High-speed Pulse Outputs	2200 khz 2100 khz Altogether must be less than 400 khz	4*200 khz	Model 1412 has 4. Others 8 * 200 khz	2*200 khz
S-Curve In Accel & Deccel	N/A	N/A	YES	YES
Jerk pulse	N/A	N/A	YES	YES
E-Cam	N/A	N/A	YES	YES
Manual Pulse Generator	N/A	N/A	YES	YES
Circular/Linear Interpolation	N/A	N/A	YES	YES

Showing 1 to 15 of 17 entries

When it comes to parts cutting, straight lines and curves are most common ones, which means in CNC programming, linear interpolation and circular interpolation are a must.